Bulb Replacement Instructions
Removal
1.Unplug lamp from power source and,
if necessary, allow time for the bulb to cool.
2.Hold the metal lamp shade and turn it counterclockwise. (See Fig. 1.)
Carefully pull the shade over the bulb
and set the shade aside. | Fig. 1 |
3.Hold the lamp and twist the bulb counterclockwise, as you would a conventional light bulb.
Installation
1. Unplug lamp from power source.
2. Hold the lamp and align the two pins
on the bottom of the bulb with the corresponding openings in the bulb base. (Either pin in either opening is fine. See Fig. 2.)
Fig. 2
CAUTION:CAUTION: Always unplug lamp before performing bulb replacement or installation.
7
Job#: 0.0637 | Title: VC02 Manual Update |
|
|
Date: 01/29/13 | Version: Rev6 |
1/30/13 12:40 PM 
