8. Troubleshooting
8.1 Troubleshooting
To troubleshoot your vacuum, see Table
Note: Always turn off the vacuum and disconnect the power cord from the electrical outlet before troubleshooting or servicing.
Table 8-1 Troubleshooting Your Vacuum
Problem | Possible Cause | Possible Solution | Reference | |
|
|
|
| |
| Switch not “ON” on Canister. | Toggle switch to “ON” on canister. | 6.3 | |
|
|
|
| |
Vacuum cleaner | Switch not “ON” on Hose/Handle. | Toggle switch to “ON” on hose handle. | 6.4 | |
will not run, or runs | No voltage at wall electrical outlet. | Try a different electrical outlet or contact a licensed | N/A | |
intermittently | electrician. | |||
|
| |||
|
|
|
| |
| Power cord not securely plugged in. | Plug power cord securely in wall electrical outlet. | 6.2 | |
|
|
|
| |
| Filter(s) are dirty or clogged. | Clean or replace filters. | ||
|
|
|
| |
| Dirt Cup is full. | Empty Dirt Cup and clear Cone Filter. | 7.1 | |
|
|
|
| |
| Blockage in Sanitizing Power Head Syphon, | Remove wand from syphon receptacle and carefully | 5.2 | |
Poor Suction: | Wand or Hose. | remove blockage. | ||
| ||||
Canister / Sanitizing |
|
|
| |
| Slide Suction Control Slider to maximum position and |
| ||
Power Head |
|
| ||
Suction power controls open. | Airflow Selector to closed position; set Floor Selector | |||
| ||||
|
| for bare floors. |
| |
|
|
|
| |
| Loose hose or wand connection. | Check that all hose and wand connections are | ||
| secured properly. | |||
|
|
| ||
|
|
|
|
26
12/12/12 3:37 PM |