8. Troubleshooting — continued
Problem | Possible Cause | Possible Solution | Reference | |
|
|
|
| |
Sanitizing Power | Sanitizing Power Head Coupler or Wand | Assure Sanitizing Power Head and Hose/Handle are | 5.3 | |
Coupler not securely fastened. | firmly connected. | |||
| ||||
Head will not run, or |
|
|
| |
Hose Power Plug not plugged into Canister | Firmly insert Hose Power Plug. | 5.1 | ||
runs intermittently | ||||
|
|
| ||
Switch not “ON” on Hose/Handle. | Toggle switch to “ON” on hose handle. | 6.4 | ||
| ||||
|
|
|
| |
| Floor Sensors may not be properly activated. | Assure the Floor Sensors actuate properly when | NA | |
| Sanitizing Power Head lies flat on cleaning surface. | |||
|
|
| ||
|
|
|
| |
Sanitizing Light Bulb |
| Push Sanitizing Power Head back and forth. If the | 6.6 | |
does not illuminate | Sanitizing Power Head is stationary. | Sanitizing Power Head is stationary for five or more | Floor | |
|
| seconds, the Sanitizing Light Bulb will turn off. | Protection | |
|
|
|
| |
| Sanitizing Light Bulb may be burned out. | Replace Sanitizing Light Bulb. | 7.7 | |
|
|
|
| |
Sanitizing Light |
| Push Sanitizing Power Head back and forth. If the | 6.6 | |
Bulb turns off | Sanitizing Power Head is stationary. | Sanitizing Power Head is stationary for five or more | Floor | |
unexpectedly |
| seconds, the Sanitizing Light Bulb will turn off. | Protection | |
|
|
|
| |
Brush Roll will not | Belt may be broken. | Order a replacement Belt and Brush Roll Kit (VH04BR1) | Table | |
turn | ||||
|
|
| ||
|
|
|
|
Note: Any other servicing should be completed only by authorized service personnel.
27
12/12/12 3:37 PM |