SET-UP INSTRUCTIONS
Bulb & Diffuser installation
1.Insert bulb into lamp by firmly holding bulb base and push into the socket (See below)
Note: Make sure bulb is fully inserted into the socket. The bottom of the bulb base should touch the plastic housing of the lamp.
2.Attach the plastic diffuser to the lamp body by first inserting the tab located at the bottom of the diffuser (A) into the opening of the lamp base (B).
3.Rotate the plastic diffuser and align the side snap tabs (C) into position – press firmly to snap parts together.
C
A
B
IMPORTANT SAFETY INSTRUCTIONS
1.Read these instructions – before using this lamp.
2.Keep these instructions – for future reference.
3.Heed all warnings.
4.Follow all instructions.
5.Do not use this lamp in damp/humid or wet locations.
6.For indoor use only.
7.Clean only with dry cloth.
8.Do not block any ventilation openings.
9.Do not place near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
10.Do not defeat the safety purpose of the polarized plug. A polarized plug has two blades with one wider than the other. The wider blade is provided for your safety. If the provided plug does not fit in your outlet, consult an electrician for replacement of the obsolete outlet.
11.Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where it exits from the lamp.
12.Only use attachments/accessories specified by the manufacturer.
13.Unplug this lamp during lightning storms or when unused for long periods of time.
14.If the lamp has been damaged in any way, such as
SAVE THESE INSTRUCTIONS
6 | 3 |
