Troubleshooting
Before requesting service on your Verilux® lamp, please read the following:
•Make sure all power connectors, cords and plugs are inserted fully and securely.
•Be sure the bulb is securely seated in the socket (see pages 8 and 9).
•Make sure there is power to the wall outlet or try another outlet – one that is not connected to a dimmer.
PROBLEM | CHECK |
| SOLUTION | |
| Has the plug come | Insert plug securely into wall outlet. | ||
| loose? |
|
|
|
Light Won’t | Is the bulb old? | Check bulb for blackening/darkening at bottom of spiral where it joins the | ||
Come On |
| base (an indicator of bulb life) and replace bulb. | ||
|
|
|
|
|
| Is the bulb connected | Be sure the bulb is securely seated into socket, repeat the bulb | ||
| securely into socket? | installation process. | ||
| Is the bulb new? | Sometimes when a new bulb is turned on for the first time the tube will | ||
Blackening/Darkening |
| darken, but this will fade after a few minutes. | ||
Is the bulb old? | With older bulbs, darkening of the tube indicates end of bulb life (this | |||
at Ends of Bulb |
| doesn’t affect operation except to reduce the amount of light available | ||
|
| since the phosphor in that area has become inactive). Bulb replacement | ||
|
| is recommended. | ||
| Has the plug come | Insert plug securely into wall outlet. | ||
| loose? |
|
|
|
|
|
|
|
|
Light Flickers | Is the bulb connected | Be sure the bulb is securely seated into the socket, repeat the bulb | ||
securely to the socket? | installation process. | CAUTION: | DISCONNECT LAMP FROM OUTLET | |
|
| PRIOR TO REPEATING THE BULB INSTALLATION PROCESS. | ||
| Is the lamp connected | Connect lamp plug only to wall outlet without dimmer switch. | ||
| to a dimmer switch? |
|
|
|
Care and Cleaning
Your Verilux lamp is made from high quality materials that will last for many years with a minimum of care.
Clean only with a soft dry cloth – DO NOT USE SOLVENTS OR CLEANERS CONTAINING ABRASIVES OR AMMONIA.
WARNING: To prevent risk of shock or personal injury when cleaning lamp, make sure you have turned off and unplugged the lamp, and allow sufficient time for the bulb to cool.
10