Verilux VT05 manual Operation, Selecting a Location, Do Not Block Vents, Instructions for Use

Operation

Selecting a Location

•Place your Verilux® HappyLight® Energy Lamp on a table or other flat surface.

•For best performance, place the HappyLight as close as 6 inches, but within

24 inches from your face.

CAUTION : Avoid placing this lamp in areas that are exposed to direct sunlight or close to heat-radiating products such as heaters. Do not place the lamp on the top of appliances that radiate heat.

WARNING:

DO NOT BLOCK VENTS

Vents are necessary for proper function of the electronic ballast; blocking them may cause overheating of the electronics and increase risk of fiire.

Instructions for Use

Use consists of sitting close to the HappyLight Energy Lamp with your eyes open. While staying oriented toward the light, feel free to engage in other activities such as reading, writing, hobbies and crafts, sewing, needlepoint, applying make-up, painting or working at your computer or desk.

1.Turn on the lamp and allow a few minutes for the bulb to achieve full

brightness.

2. The HappyLight Energy Lamp should be positioned as close as 6 inches, but within 24 inches from your face, and should be slightly offset from center (see diagram). Note: Do not look directly into the lamp.

3.Recommend switching on high setting for morning and low setting in the afternoon.

The light from the HappyLight Energy

Lamp must be directed at your eyes;

therefore, your eyes must be open to achieve the full benefit. Note: Tinted glasses reduce the amount of light reaching your eyes.

When you are feeling sluggish and lethargic, spend more time with the light, sit closer to the light or add more lighting devices to increase the intensity. If you experience edginess, or are over stimulated, move the light further away or reduce usage time.

6