Verizon SR-F1B manual Suspending metal

Suspending the SR-F1B

Note: The SR-L1B can not be suspended.

Caution

The SR-F1B weighs approximately 37 kg. Confirm that the structure of installation place, and suspending wires or belts are heavy-duty enough to support the total weight of the load before suspension. Secure to lock the fixing metals of the suspending wire or belt to the speaker. TOA takes no responsibility for any accidents or injuries resulting from the fall of the SR-F1B due to incorrect installation.

• As for the general suspending methods of the SR-F1 B, refer to the figures below.

Be sure to use two suspending wires or belts.

Fix them to the ceiling reinforcement

individually.

Even in case of oblique installation of the speaker, be sure to use two suspending wires or belts.

WARNING

Never suspend the speaker as shown in the figures below.

Never use a ringed one wire.	Never suspend the speaker	Never link more than three	Never suspend the speaker using
	with a single wire.	speakers vertically.	the speaker handles.

Suspending metal

Ring

Stud

Fitting metal supplied with the SR-F1B

32202 Ring/Stud Pan Fitting (Aeroquip made)

To suspend the SR-F1B from its stud,

prepare the following applicable metal.

32326 Stud Fitting (Aeroquip made)

3