Verizon SR-F1B System Composition, Mounting Truss Module, Example Of Usage, AMFS-1X2-30Connecting

SR-F1B SPEAKER FLYING SYSTEM

This speaker flying hardware system is manufactured by ATM FLY-WARE™ (ATM GROUP, Inc.) of the United States for use with TOA's SR-F1B speaker. The flying system enables various speaker array configurations to be constructed quickly and safely without special components.

SYSTEM COMPOSITION

The flying system is comprised of five main components. AMFS-1X2-SME

35QR-1x2.2-AMFSP

1 .[AMFS-SRF1-TH Truss Module]Allowable load 275 kg The truss module attaches to both the top and bottom of the SR-F1B speaker.

AMFS-1X2-SME 0

2.5QRP

2.5QRP

<Note> Speaker fixing screws are supplied with the truss module.

2 .[AMFS-1X2-30 Connecting		Bar]	Allowable load 278 kg
	The connecting bar is used for horizontal speaker connection.
SM-1X2-[AMFS3.	ShacklEAllowablMounte	]	loae 22d	5k g
	The shackle mount is used to set suspension points for vertical speaker
	suspension. (Multiple rows of speakers can be suspended at different tilt
	angles.)
4.[AMFS-1X2-SB Stacking Bracket]			Allowable load	194 kg
	The stacking bracket is used to suspend multiple rows of speakers in a
	straight vertical format without varying		array tilt angles.
5 . [2.5QRP Quick Release Pin]			Allowable load 835 kg
	The quick release pin has a lock function and is used to connect
	individual parts.

AMFS-SRF1-TH

2.5QRP

AMFS-1X2-SB

AMFS-1X2-30

2.5QRP

AMFS-SRFI-TH

2.5QRP

MOUNTING TRUSS MODULE

Truss module Pan fitting ring

Hexagon bolt 3/8" x 41/2"

Caution

Never use mounting hardware other than supplied.

WARNING

The following limitations must be observed even when the allowable load requirement is met.

(1) A maximum of four speakers can be suspended per shackle mount (AMFS-1X2-SME) or stacking bracket (AMFS-1X2-SB).

Example 1: A column of eight speakers configured two high and four wide can be suspended from two AMFS-1X2-SME Shackle Mounts.

Example 2: A column of ten speakers configured two high and five wide would require suspension from a minimum of three AMFS-1X2- SME Shackle Mounts.

(2)A maximum of three rows of speakers using this flying hardware system may be suspended in the vertical plane.

Confirm the following points before installation.

(1)Total actual load of each component must be lower than the allowable load for that component.

(2)All quick release pins (2.5QRP) must be inserted into other components to lock them securely.

(3)All components that relate to array suspension (i.e. enclosures, individual components of the flying hardware system, clamps, connectors, and suspension devices) must be free from any deformation, crack and corrosion.

2.5QRPAMFS-1X2-SB

AMFS-SRFI-TH

2.5QRP

EXAMPLE OF USAGE

AMFS-1X2-30

AMFS-1X2-SME

AMFS-1X2-SB

AMFS-1X2-SME