Vermont Casting 2477 manual Dutchwest Convection Heater Model

Dutchwest Non-Catalytic Convection Heater

Distance from Center of Flue Collar to Wall in Top-Exit Installations

Dutchwest Convection Heater Model 2477

NOTE: These are not clearance distances. These measurements indicate where the centerline of the flue col- lar will be for various installations. Measurements are from the centerline of the flue collar to the wall, not the wall protector.

B A C

C

E D

F

F

ST427

	UNPROTECTED SURFACES			PROTECTED SURFACES
			Corner			Corner
	Parallel Installations		Installations	Parallel Installations		Installations
Chimney Connector	Side	Rear	Corner	Side	Rear	Corner
Listed, Approved	(A) 35”	(B) 13”	(C) 19⁵⁄₈”	(D) 21”	(E) 13”	(F) 19⁵⁄₈”
Double-wall, with	(889 mm)	(330 mm)	(499 mm)	(533 mm)	(330 mm)	(499 mm)
flue collar shield
Single wall, with	(A) 28”	(B) 12”	(C) 18⁵⁄₈”	(D) 19”	(E) 9”	(F) 16¹⁄₈”
Connector heat shields	(711 mm)	(305 mm)	(473 mm)	(483 mm)	(229 mm)	(410 mm)
and flue collar shield
Single wall with no	(A) 35”	(B) 22”	(C) 26⁵⁄₈”	(D) 19”	(E) 17”	(F) 22⁵⁄₈”
heat shields	(889 mm)	(559 mm)	(676 mm)	(483 mm)	(432 mm)	(575 mm)

30002314 15