Vermont Casting 2478 The Chimney Connector, Dutchwest Non-CatalyticConvection Heater, Two Weeks

Dutchwest Non-Catalytic Convection Heater

helpful) and vacuum away ash using a flexible vacu- um hose inserted into each passage. Care should be taken not to damage the white fibrous material in this rear chamber. (Fig. 34)

The Chimney Connector

TWO WEEKS:

•Inspect the chimney connector and chimney. Clean if necessary.

TWO MONTHS:

•Inspect the chimney and chimney connector. Pay particular attention to the horizontal runs of chimney connector, and the elbows. Clean the system if nec- essary.

ANNUAL SPRING CLEANING:

•Disassemble the chimney connector and take it outdoors for inspection and cleaning. Replace weak sections of connector.

•Inspect the chimney for signs of deterioration. Re- pairs to a masonry chimney should be made by a professional mason. Replace damaged sections of prefabricated chimney. Your local Dutchwest dealer or a chimney sweep can help determine when re- placement is necessary.

•Thoroughly clean the chimney.

Inspect and

Vacuum Both

Rear Corners

ST876 Ash Build-Up

Fig. 34 Inspect and clean out ash accumulation on either side of the non-catalytic combustion system.

26 30002278