Assembly Attach the Side Tables | Vermont Casting 6100 specs

Assembly Step 4 - Attach the Side Tables

Tools Needed:

3/8”

wrench

USE HARDWARE BAG C :

1/4-20 hex

nut (8)

LOCATE THESE PARTS:

1/4-20 x 3/4”

bolt (8)

7/16”

wrench

side table (2)

NOTE: For grill models equipped with a side burner, only the right side table will be installed. Refer to the instructions on the following pages for side burner installation. Retain 4 nuts and 4 bolts from hardware bag C to be used for the side burner.

1.Insert the 3/4” bolts through the holes in the support brackets of the side table.

2.Attach the side table to the four holes located in the side of the grill bottom using the locking hex nuts provided.

3.Attach the opposite side table the same way.

14

Image 13

Vermont Casting 6100 owner manual Assembly Attach the Side Tables

Contents

Great Outdoors Table of Contents 6000,7000,8000 Series Gas Grill Portable L.P. Gas Barbecue Grills Fuel Regulator and Hose Transporting a Full Cylinder Filling and Purging Type 1 L.P. GAS Cylinders Take These Instructions to the L.P. Gas DealerExample a Filling a Type 1 Cylinder Valve Example B Getting Started Tools needed to assemble grillUnpacking the Grill Parts Liquid Propane Models Locate these parts Assembly Identifying the Grill Parts Tools Needed Assembly Attach the Base to the Pillar Grill bottom Assembly Heat Shield Back side of grill Assembly Attach Grill Bottom to Pillar Assembly Step Assembly Attach the Side Tables Only for grills equipped with a side burner Side Burner Installation Phillips head screwdriver Valve orifice properly Seated into burner tube USE Hardware BAG D Assembly Assemble the Grill Lid Assembly Step No Tools are Needed Assembly Installing the Internal Grill Parts Set the warming rack onto the back of the cooking grids Installing an L.P. Gas Cylinder Connecting the Regulator to Cylinder Connecting the L.P. Gas Cylinder Side Burner Option L.P. Gas Only Installation for Natural GAS Natural Gas Grills Connecting to Natural Gas To Disconnect the Fuel Supply Operating the QUICK-CONNECTLeak Test Connections Use and Care Directions Chapter How to Check the Fuel Supply System for Gas Leaks Leak Testing Igniter Lighting System Lighting InstructionsLighting Instructions Match Lighting HOW to Shut OFF the GrillLocating the Match Lighting Hole 6000,7000,8000 Series Replacement Parts Pillar Assembly Bottom / Burner AssemblyBase Assembly Model 6100 Series Components Left Side Table Assembly Right Side Table AssemblySideburner Components Variable Components