Vermont Casting BFC36 Safety Information, Table of Contents, Description, Precautions, Drafts

Models: BFC36

1 24
Download 24 pages 58.74 Kb
Page 2
Image 2
BFC36 Balance Flue Heat-Circulating Fireplace

BFC36 Balance Flue Heat-Circulating Fireplace

Safety Information

Please Read This Manual Before Installing and Using Fireplace

IMPORTANT: Read all instructions and warnings carefully before starting installation. Failure to follow these instruc-

tions may result in a possible fire hazard and will void the warranty.

Description

The BFC36 fireplace is a solid fuel, woodburning fire- place. The BFC36 is a balanced flue (closed combus- tion) heat-circulating fireplace which receives outside

combustion air through the chimney system.

Precautions

CFM Corporation fireplaces and component parts have been highly tested and will operate safely when in- stalled in accordance with instructions provided in this manual. Carefully read and understand all instructions before beginning installation.

If you notice any damage to fireplace or component parts, immediately report damage to your Vermont Castings, Majestic Products dealer.

Only use CFM Corporation components or the warranty will be voided and a fire hazard may be created.

CFM Corporation warranty will be voided by and CFM Corporation disclaims any responsibility for the follow- ing actions:

Installation of any damaged fireplace or chim- ney component;

Modification of fireplace, chimney assembly or any component parts thereof; (except for chase flashings as detailed in CFM Corporation Chimney Top installation instructions).

Installation other than as instructed by CFM Corporation; or

Installation and/or use of any component part not manufactured or approved by CFM Corpo- ration in combination or assembly with a CFM Corporation fireplace system, notwithstand- ing any independent testing laboratory or other third party approval of such component parts or accessory.

Any such action may possibly cause a fire hazard.

Consult local building codes to ensure that you are in compliance before installing the fireplace.

This fireplace and chimney system must be vented to the out-of-doors.

Do not obstruct or modify air inlets/outlets in any manner.

Do not install combustible materials on any of the black fireplace surround.

Burn only solid wood fuel or gas logs.

The BFC36 is intended for operation only with the doors closed.

Do not install a solid fuel burning insert or other products not specified for use with this fireplace.

WARNING: Check with your electronics manufac- turer before installing a television or other electron- ic device above this fireplace.

Proposition 65 Warning: Fuels used in gas, wood-

burning or oil fired appliances, and the products of combustion of such fuels, contain chemicals known to the State of California to cause cancer, birth de- fects and other reproductive harm.

California Health & Safety Code Sec. 25249.6

Drafts

The fireplace should not be located in areas that create drafts (ie: frequently opened doors and central heating air inlets/outlets) that hamper the normal flow of air into the fire.

Gas Logs

If you plan to install a gas log, the gas line should be installed before framing the fireplace. The gas line must be installed by a certified gas line installer.

BFC36

Listed

UL127 / ULC-S610

Standard for Factory Built Fireplaces

Unit: WABD3J0

 

Table of Contents

 

Safety Information

2

Specifications and Framing

3

Parts Identification

5

Chimney Requirements

6

Planning Information

7

Installation

8

Replacement Parts

19

Accessories

20

2

7412647

Page 2
Image 2
Vermont Casting manual Safety Information, Table of Contents, BFC36 Balance Flue Heat-CirculatingFireplace, Description