Vermont Casting Safety Information, Description, Precautions, Drafts, EWF30 Listed, 20008662

Models: EWF30

1 32
Download 32 pages 28.92 Kb
Page 3
Image 3
Safety Information

Vermont Castings EWF30

Safety Information

Please Read This Manual Before Installing and Using Fireplace

IMPORTANT: Read all instructions and warnings carefully before starting installation. Failure to follow these instructions may result in a possible fire hazard and will void the warranty.

Description

The EWF30 fireplace is a clean burning, non-catalytic, EPA certified solid fuel, wood burning, heat circulating fireplace.

Precautions

CFM Specialty Home Products fireplaces and com- ponent parts have been highly tested and will operate safely when installed in accordance with instructions provided in this manual. Carefully read and understand all instructions before beginning installation.

If you notice any damage to fireplace or component parts, immediately report damage to your CFM Spe- cialty Home Products dealer.

Only use CFM Specialty Home Products components or the warranty will be voided and a fire hazard may be created.

CFM Specialty Home Products warranty will be voided by and CFM Specialty Home Products disclaims any responsibility for the following actions:

Installation of any damaged fireplace or chim- ney component;

Modification of fireplace, chimney assembly or any component parts thereof; (except for chase flashings as detailed in CFM Corporation Chimney Top installation instructions).

Installation other than as instructed by CFM Specialty Home Products; or

Installation and/or use of any component part not manufactured or approved by CFM Specialty Home Products in combination or assembly with a CFM Specialty Home Prod- ucts fireplace system, notwithstanding any independent testing laboratory or other third party approval of such component parts or accessory.

Any such action may possibly cause a fire hazard.

Consult local building codes to ensure that you are in compliance before installing the fireplace.

This fireplace and chimney system must be vented to the out-of-doors.

Do not obstruct or modify air inlets/outlets in any manner.

Do not install combustible materials on any of the black fireplace surround.

Burn only solid wood fuel.

The EWF30 is intended for operation with the doors closed or fully open only with the optional spark screen in place. The doors must be in the fully closed position for clean burning operation.

Do not install a solid fuel burning insert or other products not specified for use with this fireplace.

This fireplace is not approved for installation in mobile homes.

NOTE: Hairline cracks in hearth brick and ash lips are not a safety issue and do not need to be re- placed.

Drafts

The fireplace should not be located in areas that create drafts (ie: frequently opened doors and central heating air inlets/outlets) that hamper the normal flow of air into the fire.

EWF30

Listed

UL 127 / ULC-S610
Standard for Factory Built Fireplaces

Unit: WFE05H0

20008662

3

Page 3
Image 3
Vermont Casting Safety Information, Description, Precautions, Drafts, EWF30 Listed, Vermont Castings EWF30, 20008662