Vermont Casting RDVOD manual Connect the Gas Supply Line

Models: 3225,3226, 3227, 3228, 3229, 3230, 3231, 3232, 3350, 3351, 3352, 3353, 3354, 3360, 3361, 3362, 3363, 33646, 33656, 3366, 3367, 3368, 3369, 3390, 3391, 3392, 3393, 3394, 3395, 3396, 3397, 3398, 3399 RDVOD

1 38
Download 38 pages 43.11 Kb
Page 20
Image 20

 

Rear Log

 

Bracket

 

LG158

Fig. 38

Radiance firebox.

Right Log

Right Rear Log

Left Rear Log

Left Bracket

Decorative

Right

 

 

Grate

Bracket

LG156

Fig. 39 Install the left and right rear logs and the right log.

4.Install the right log by engaging hole on the bottom with pin on the right rear log. (Fig. 40) Set the bottom of the log on the bracket and bring forward to come in contact with decorative grate on right.

5.Loosely sprinkle the lava rocks directly on top of the burner just behind decorative grate. (Fig. 41) Use the lava rock to cover brackets on the burner. Do not place lava rocks toward back of burner. The lava rock is shipped inside the bag assembly.

Radiance Direct Vent /Natural Vent Gas Heater

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Log rests on

 

 

Lava Rock

 

 

decorative grate

 

 

 

LG155

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Fig. 40

Completed log installation.

 

Left Rear Log

Top View

Right Rear

Log

 

 

 

Decorative Grate

 

Lava rock may

 

be placed in

LG160

 

 

this area

 

 

 

Fig. 41

Lava rock placement.

 

Connect the Gas Supply Line

Check the Rating Plate attached by a steel cable to the firebox, to confirm that you have the appropriate firebox for the type of fuel to be used. The Radiance may be converted from one gas to another using the appropri- ate Fuel Conversion Kit listed on page 30.

In the U.S.; Gas connection should be made in ac- cordance with current National Fuel Gas Code, ANSI Z223.1/NFPA 54. Since some municipalities have addi- tional local codes, be sure to consult your local authority.

In Canada; consult the local authority and CSA-B149.1 installation code.

Always check for gas leaks with a mild soap and water solution. Do not use an open flame for leak testing.

Light the pilot according to the directions on Page 24, before going to the next step.

20004188

21

Page 20
Image 20
Vermont Casting RDVOD manual Connect the Gas Supply Line, Install the left and right rear logs and the right log