Audio Cable
Mounting
Surface
Cable Cubby 300C
Screw Clamp
Figure 10. Cable Cubby 300C, Installation View
4.From the underside of the table, reinstall the screw clamps on the enclosure at a height at which the clamp will reach the underside of the tabletop.
ATTENTION: Potential damage to property. Do not overtighten the Phillips head screws on the screw clamps. Overtightening can bend the horizontal flange of the screw clamp.
5.Snugly tighten the Phillips head screws on the screw clamps to secure the enclosure to the surface.
6.Tighten the locking thumbscrews on the screw clamps to lock the clamp in position.
Cable Cubby 300/600/800 • Installation 11