Extron electronic 800, 600, 300S, 300C manual Installing the Power Module

The simplest way to install the cables and AAPs in the Cable Cubby 300, 600, and 800 is to populate the shelf brackets with split or standard AAPs outside the cubby and then install the populated AAP shelf assembly into the cubby.

NOTE: On US/domestic models, the power module takes up two AAP spaces. Cable pass-through AAPs take two, three, or four AAP spaces.Consider the arrangement of the Cable Cubby AAPs when you install them so that you do not waste AAP space.

Installing the Power Module

From the underside of the Cable Cubby, gently push the power module into the desired position at the desired elevation. Secure the power module into position with four Phillips head screws (see figure 8).

NOTE: The universal AC outlet is fully compatible with various plug types. See the Universal AC Outlet Compatibility Guide on the Extron website, www.extron.com, for compatibility details on all plug types.

ATTENTION: Potential damage to property. To ensure good electrical grounding, use the star washers with the screws.

Extron

Cable Cubby 600

2 Screws ea. side

Figure 8. Installing the Power Module

Cable Cubby 300/600/800 • Installation 8