Use & Care Manual

 

 

 

 

 

ENGLISH

 

 

 

CONTROL INSTRUCTIONS FOR USE

The display (ref.4) and the “Peacock Tail” (ref.6) show

 

the power level, updated in real time.

WARNING

This touch control works using optical light sensing technology. When first connecting electrically or after a power failure, any direct strong light over the sensor area may affect the touch control functionality. When powering on the unit make sure that no strong light is shining direct over the touch control zone, it can compromise the start-up sensor calibration resulting in an unresponsive touch control.

When the cooktop is connected to the electrical voltage supply all lights and digits turn on to indicate a proper activation. This operation will be completed after few seconds, the control turns off automatically. Now the cooktop is ready for operations.

Switching the control on

Eventually hold the [LOCK] key in case the commands are locked (see that the lock led is on and turns off after a few seconds).

Touch the main [ON/OFF] key in order to make each single zone available for selection.

All the displays show power level “0”, if no actions are performed the control shuts down again after about 10 seconds.

Elements setting

Touch the proper [ON] key (ref.2) in order to select the desired zone: the HOT SURFACE (ref.3) indication starts flashing, waiting for a user input.

5b

5a

 

4

21

3

Figure. 6

Touch the slide bar to set the power level (levels 0 to 9 are available), moving the finger along it or directly touching the desired value. If your cooktop model has no slide bar.

After a 5 seconds time-out the value is accepted, the HOT SURFACE led (ref.3) stops flashing and gets steady. The “Peacock Tail” disappears after some seconds more.

Touch [ON] key to confirm the value before the time-out expires.

The following picture represents the Full Power Scale whereas the control uses all the available power range, from 0% up to the 100% corresponding to level 9.

Level 4 corresponds to 15% of the available power.

6

7

Figure. 7

Using the Low Power Scale

Once a cooking zone has been selected, touch the [LOW TEMP] key (ref.8) in order to enable the Low Power Scale (ref.9) then set the power level in the usual way.

9

8

Figure. 8

10

Page 10
Image 10
Verona VECTEM365 VECTEM304 manual Switching the control on, Elements setting, Using the Low Power Scale

VECTEM365 VECTEM304 specifications

Verona VECTEM365 and VECTEM304 represent innovative advancements in the realm of technology, engineered to meet the demands of modern users while providing exceptional performance and seamless functionality. These products exemplify the perfect blend of design, efficiency, and cutting-edge features.

The Verona VECTEM365 is known for its adaptability and user-centric design. It integrates powerful processing capabilities, which empower users to tackle multitasking with ease, making it ideal for both professional and personal use. Its advanced system architecture enhances performance, ensuring swift response times and a smoother user experience. The device is also equipped with a high-resolution display that delivers vibrant visuals, making it suitable for media consumption, gaming, or graphic design.

One of the defining features of the VECTEM365 is its extensive connectivity options. It supports numerous wireless protocols, including Wi-Fi 6 and Bluetooth 5.0, ensuring high-speed data transfer and stable connections. Additionally, its compatibility with various peripherals enhances its versatility, allowing users to customize their experience according to their specific needs.

On the other hand, the Verona VECTEM304 focuses on durability and reliability. Designed with robust materials, it is built to withstand daily wear and tear, making it an excellent choice for outdoor or industrial environments. Its battery life is particularly noteworthy, as it offers extended usage hours, enabling users to remain productive without frequent recharging.

The VECTEM304 is also equipped with advanced security features, providing peace of mind for users who handle sensitive information. Biometric authentication options, such as fingerprint scanning and facial recognition, add an extra layer of protection, ensuring that data remains secure.

In terms of software, both models come pre-installed with the latest operating systems and essential productivity applications, offering users a comprehensive ecosystem right out of the box. Their user interfaces are intuitive, allowing even those less familiar with technology to navigate seamlessly through various functionalities.

In conclusion, the Verona VECTEM365 and VECTEM304 stand out as prominent options in their respective categories. With a focus on performance, durability, and user experience, they cater to a diverse range of needs, appealing to professionals, students, and casual users alike. Verona's commitment to excellence in design and technology is evident in these models, promising reliable and efficient devices for any modern user.