Verona VECTEM365 VECTEM304 manual Rest Heat

Use & Care Manual

ENGLISH

When the timer value elapses:

•An end of activity beep sequence sounds: three short beeps followed by a long interval are repeated for 1 minute.

•The led indicator related to the elapsed timer flashes.

•The timer value “00” flashes too and will continue to flash waiting for a user confirmation.

•Touch [T-] or [T+] to cancel the expired timer, the display switches to the next shortest timer or gets blank if there aren’t any other timer set.

WARNING: the timer is only intended as an acoustic advisor that recalls the attention of the user.

Timers have no effect on the heating elements. The cooking zone must always be stopped manually by touching the related [OFF] key.

Rest Heat

The HOT SURFACE indicators remain on even after the end of the cooking activity, just the necessary time to let the surface cool down below a safety value.

Figure. 12

The residual heat time depends on the power level that was set on the cooking zone and the time the heating element has been working for.

For example, a cooking zone that has been working for more than 5 minutes at full power will take half an hour to cool down before the Residual Heat indication fades away. At level 1 it will take about 10 minutes.

Features

The control is checking its own ambient temperature and stops any activity in case of overheating of inner parts. Let the appliance cool down.

13