Verona VECTIM365 manual Cutout Requirements G, C Fed, Important Preparation Suggestions, English

Installation Manual

ENGLISH

CUTOUT REQUIREMENTS

G

WALL COVERING CABINETS,

AND COUNTERTOP MUST

WITHSTAND HEAT UP TO 93° C (200° F)

C

FE D

Figure 3. Cutout dimensions and requirements

CUTOUT	A	B	C			D	E	F	G
WIDTH
30”	28-11/16”	19-1/4”	30”			18” (45.7 cm)	30” (76.2 cm)	2” (5 cm) min	13” (33 cm)
(76.2cm)	(72.9 cm)	(49.0 cm)	(76.2 cm) min		min		min.	Clearance	Depth of
	28- 15/16”	19-5/8”				Height from	(see note*)	from cutout to	unprotected
	(73.5 cm)	(49.8 cm)				countertop	Clearance	side wall on	overhead
						to nearest	from	the left and	cabinets
36”	34-1/16”	19-1/4”	36”
						cabinet on	countertop to	right of the
(91.4cm)	(86.5 cm)	(49.0 cm)	(91.4 cm) min
						either side of	unprotected	unit
	34- 5/16”	19-5/8”
						unit	overhead
	(87.2 cm)	(49.8 cm)
							surface
IMPORTANT				* NOTE
Under the cooktop it is necessary to install a partition,				24” (61 cm) min. clearance if bottom of wood or metal cabinets is
as shown in figure 2-3.				protected by not less than 1/4“ (0.6 cm) flame retardant millboard
				covered with no less than No. 28 MSG sheet steel 0.015” (0.04 cm)
				stainless steel, or 0.024” (0.06 cm) aluminum or 0.020” (0.05cm)
				copper. 30”(76.2 cm) min. clearance between top of cooking platform
				and bottom of unprotected wood or metal cabinet

Important Preparation Suggestions

1.Chamfer all exposed edges of decorative laminate to prevent damage from chipping.

2.Radius corners of cutout and file to Insure smooth edges and prevent corner cracking. Recommend 1/4“or 3/8“diameter drill In each corner.

3.Rough edges, inside corners which have not been rounded and forced fits can contribute to cracking of the countertop laminate.

This cooktop has been designed with wide tolerances of cut-out to cover possible replacement with other brands. We recommend to that you consider the minimum dimension of cut- out size In the case of new Installation.

Some cut out sizes for possible replacements:

Dim.		Inches	cm
•	30”	28-15/16” x 19-5/8”	73,5 x 49,8
•	36”	34-5/16” x 19-5/8”	87,2 x 49,8

5