PLEASE READ THE FOLLOWING PRECAUTIONS
This manual is intended as a general guide for trained and qualified personnel who are
aware of the dangers of handling potentially hazardous electrical and electronic
circuits. This manual is not intended to contain a complete statement of all safety
precautions that should be observed by personnel in using this or other electronic
equipment.
The installation, operation, maintenance, and service of this equipment involves risks
both to personnel and equipment and must be performed only by qualified personnel
exercising due care. Vertex Communications Corporation shall not be responsible for
injury or damage resulting from improper procedures or from the use of improperly
trained or inexperienced personnel performing such tasks.
During installation and operation of this equipment, local building codes and fire
protection standards must be observed.
WARNING
ALWAYS DISCONNECT POWER BEFORE OPENING COVERS,
DOORS, ENCLOSURES, GATES, PANELS, OR SHIELDS.
ALWAYS USE GROUNDING STICKS AND SHORT OUT HIGH
VOLTAGE POINTS BEFORE SERVICING. NEVER MAKE
INTERNAL ADJUSTMENTS OR PERFORM MAINTENANCE OR
SERVICE WHEN ALONE OR FATIGUED.
Do not remove, short-circuit, or tamper with interlock switches on access covers, doors,
enclosures, gates, panels, or shields. Keep away from live circuits. Know your equipment
and don't take chances.
WARNING
IN CASE OF EMERGENCY BE SURE THAT POWER IS DIS-
CONNECTED.