4.1.2 BATTERY INSTALLATION / REMOVAL

1.To install the battery pack, insert the battery pack into the battery rest on the bottom of the transceiver, then turn the Battery Pack Lock to the “LOCK” position with a coin.

2.To remove the battery pack, turn the transceiver off, open the Battery Pack Lock on the bottom of the transceiver, then slide out the battery from the transceiver.

NOTE

The battery lock must be set to “LOCK” position to ensure water integrity and from the battery coming loose.

BELT CLIP INSTALLATION / REMOVAL

INSTALLATION

Install the Belt Clip as shown below.

REMOVAL

Pulling the Belt Clip toward up (c) while pulling the top edge of the Belt Clip toward back (d).

c

d

Page 12

 

HX760S