04 tEP (TEMP ADJUST)

Function: Calibrating the Thermometer setting

Available Values: –9.9 ~ +9.9Default: 0.0

See page 31 for details.

05 LP (LAMP MODE)

Function: Selects the Lamp illumination method for the LCD/ Keypad.

Available Values: Cnt / kEY / off

Default: kEY

kEY: Illuminates the LCD/Keypad for 5 seconds when any key is pressed.

Cnt: Illuminates the LCD/Keypad continuously.

Off: Turns off the backlight for the LCD and keys.

06 dr (DIMMER)

Function: Adjusting of the display brightness

Available Values: 00 / 01 / 02 / 03

Default: 02

07 SnL (SCAN LAMP)

Function: Enable/Disable the automatic illumination of the lamp when a signal is received on a channel during Scanning

Available Values: on / oFF

Default: oFF

08 SCn (SCAN DISPLAY)

Function: Selects the Scanning display mode

Available Values: nor (Normal) / SPL (Special)

Default: nor (Normal) When this menu is set to “nor (Normal)”, the channel num-

bers during scan will be shown as scrolling on the display. When “SPL (Spe- cial)” is selected the channel numbers on the display do not change unless a call was received. The channel shown is the last channel that was received.

09 dt (DUAL WATCH MODE)

Function: Selects dual or tri-watch as desired.

Available Values: d- (Dual Watch) / t- (Triple Watch)

Default: d- (Dual Watch)

See page 27 for details.

HX760S

 

Page 37