10.Press PTT switch of the HX760S to exit the HX760S to normal operation.

11.Turns both BH-2and HX760S off.

7.2 CONTROLS AND SWITCHES

d f

c

h

i

e g

j

cMicrophone

dLED Indicator

Blinking Blue: The BH-2is correctly recognized by the HX760S.

Blinking Red: The BH-2is not correctly recognized by the HX760S.

LED color is Red and Blue: The battery voltage of the BH-2is Low.

ePOWER() Switch

Turns the BH-2on and off.

To turn the BH-2on, press and hold this switch until the BH-2’s LED indi- cator glows red, and the beeper sounds a high pitch tone (approximately three seconds).

To turn the BH-2off, press and hold this switch until the beeper sounds two brief tones (emit the one low pitch tone and then one high pitch tone), and the BH-2’s LED indicator glows red (approximately five seconds).

fVOLUME (–) Switch

Pressing this switch decrease the receiver volume level.

Secondary use:

Press this switch while pressing and holding the PTT switch, to decreases the microphone gain of the BH-2.

HX760S

 

Page 33