33
MIC GAIN
This parameter programs the Microphone Input
Sensitivity.
The available values for the Microphone Gain are
“LOW,” “NORMAL,” or “HIGH.”
PASSWORD SET
This parameter programs the password for the
entering to the Dealer mode of the transceiver.
To enter the password, double click the left mouse
button on this column, enter the desired pass-
word (four digits; numeric only) from the key-
board, then press the [ENTER] key to accept the
new password.
SP MUTE ACT
This parameter selects the Speaker Mute function.
The available selections are “DCD-L MUTE” and
“DCD-H MUTE.”
DCD-L MUTE: Reduces the speaker audio
output while the DCD termi-
nal (pin 4 of the DATA Jack)
is set to “LOW.”
DCD-H MUTE: Reduces the speaker audio
output while the DCD termi-
nal (pin 4 of the DATA Jack)
is set to “High.”
SP MUTE LEVEL
This parameter sets the Audio mute level.
To program the Audio mute level, double click
the left mouse button on this column, enter de-
sired mute level from the keyboard, then press
the [ENTER] key to accept the new mute level.
The available selections are “-100” to “0.”
TOT
This parameter determines the Time-Out Timer
countdown Time.
The available values are “1/2/3/5/10/15/20” min-
utes or “off.”
TUNING
This parameter programs the Automatic Anten-
na Tuner function.
The available selections are:
OFF: Disables the automatic tuning
function of the Automatic An-
tenna Tuner.
To initiate antenna tuning on
a particular, with this selec-
tion set to “Off,” you must
press the keypad’s [3(TUN-
ER)] key on the front panel.
CH CHANGE: Activates the Automatic An-
tenna Tuning function when
the memory channel is
changed.
POWER ON: Activates the Automatic An-
tenna Tuning function on all
channels of the current Mem-
ory Bank when the radio is
turned on.
VFO
This parameter defines whether the “VFO” mode
shall be “Enabled” or “Disabled” from the front
panel’s [V/M] key.
VOL LIMIT
This parameter determines the audio volume lev-
el when the VOL knob is fully counter-clockwise
(but not into the click) position.
To program this parameter, double click the left
mouse button on this column, enter the desired
audio volume level (0 - 100), then press the [EN-
TER] key to save and exit.
DEALER MODE
This parameter defines whether the “DEALER
MODE” selection shall be “Enabled” or “Dis-
abled” from the transceiver’s set (“menu”) mode.
RETURN
This parameter defines whether the “RETURN”
selection shall be “Enabled” or “Disabled” from
the transceiver’s set (“menu”) mode.
CLOCK SHIFT
This parameter defines whether the “CLOCK
SHIFT” selection shall be “Enabled” or “Dis-
abled” from the transceiver’s set (“menu”) mode.
CE77 PC Programming Software