TROUBLESHOOTING GUIDE
Problem | Cause | Repair Method | |
|
| • Too much water in the | • Drain water from the unit |
|
| unit while it is running | until the water level is |
|
| • Lid is not properly sealed | equal to the “Max Water |
Water is leaking from the lid |
| Level” marker. | |
|
|
| • Close the lid and ensure |
|
|
| that both clasps are |
|
|
| engaged |
|
| • Drain pipe is clogged | • Clean out the drain pipe |
Unit does not drain or drains | • The end of the drain pipe | • Ensure that the end of the | |
slowly | is too high | drain pipe is lower than | |
|
|
| the outlet valve |
|
| • The power cord is not | • Properly plug the unit in |
| No wash | properly plugged in. | • Turn the power on |
The machine |
| • The power is turned off |
|
|
|
| |
| • The plug is inserted | • Insert plug correctly | |
is out of order |
| ||
| incorrectly | • Ensure that the lid is | |
| No spin | ||
| • The lid is not correctly | properly closed and | |
|
| ||
|
| closed | secured |
|
|
|
|
| FREQUENTLY ENCOUNTERED PROBLEMS | ||
Problem Encountered | Explanation |
Black powder present in the water, water has a | Make sure that the ozone destruct filter is |
black tint to it | properly rinsed before installation. |
| There is a small volume of water left in the |
While using the CuisineClean for the first time, | machine after conducting the factory |
some water drains from the drainpipe | performance tests. It is common for it to drain |
| out during the first wash cycle. |
|
|
