Vicks V3700 Setting up your humidifier, Placement, Soak Filter, Scent Pad, DO NOT wring filter

Setting up your humidifier

Placement Step 1

Select a firm, level location at least 6” (15cm) from any walls for proper airflow. Place the humidifier on a water-resistant surface, as water can damage furniture and some flooring.

Kaz will not accept responsibility for property damage caused by water spillage.

Soak Filter Step 1 Step 2 Step 3

	Remove tank and set	Remove filter tray from	Fold filter flat. Insert
	aside. Remove filter from	unit before installing the	wet filter into filter tray.
	humidifier and soak the	wet filter.	Place filter tray back
	filter in cool water.		in humidifier.
	DO NOT wring filter.
Scent Pad	Step 1	Step 2	Step 3

Remove tank and locate	If there is a used scent pad	Insert scent pad with angled
Scent Pad slot.	in the slot carefully remove	side facing downward into
	it. Replace with a new scent	the scent pad slot. You can
	pad. Carefully open scent	use the bag as a holder
	pad bag taking care to hold	during insertion.
	pad using bag. Use care not
	to come in direct contact
	with new scent pad.

Vicks Scent Pads work with heat to gradually release soothing aromatic vapors.

One complimentary menthol vapor scent pad is included with your unit.

Recommended Usage for the Vicks Menthol Scent Pad (VSP-19/VSP-19-CAN):

·Not recommended for infants under 10 pounds.

·For children between 10-22 pounds do not use more than 2 pads in a 24 hour period.

4