Vidikron v120 - page 56

Installation

44 Vidikron Vision Model 120 Owner’s Operating Manual

PRELIMINARY

Configure Lens Motor Trigger CineWide with AutoScope maintains constant image height independent of the aspect ratio,

while using the full display resolution of the projector. It accomplishes this by moving the

anamorphic lens in front of the primary lens when widescreen material is being viewed.

When the viewer transitions back to 16:9 or 4:3 source material, the anamorphic lens moves

out of the light path.

To configure the lens motor trigger on the VHD Controller for proper AutoScope operation:

1. Project a 2.35:1 aspect ratio test pattern or other image on the screen.

2. Press MENU on the remote control and enter the Service menu passcode.

3. Select Service from the Main menu.

4. Select Triggers from the Service menu.

5. Assign the trigger output to which the lens motor is connected to the Cinema and

IntelliWide 2.35 aspect ratios. This enables the lens motor to move the anamorphic lens

into position (in front of the primary lens) when either aspect ratio is selected.

6. To save the trigger settings, press repeatedly to highlight “Save.” Then, press ENTER.

7. Select the Cinema aspect ratio to move the anamorphic lens into position, if it isn’t

already. To do this, press CINEMA on the VHD Controller remote control (Figure 2-5), or

press or repeatedly with no menus visible on-screen.

Adjust the Anamorphic Lens Adjusting the Horizontal (X) Lens Position:

1. Project a white field on the screen.

2. Loosen the Yaw/X-Adjustment Levers underneath the lens.

3. Slowly move the anamorphic lens into place so that there are no shadows on either side

of the screen:

4. When the horizontal position is properly set, tighten the Yaw/X-Adjustment Levers to

secure the lens in place.

➤

➤

Too Far Right

Too Far Left

Correct position

Contents

Main Page TWO YEAR LIMITED WARRANTY For Projectors, Video Processors and Controllers Page VIDIKRON PRODUCT INFORMATION RETAIN THIS INFORMATION FOR YOUR RECORDS Safety Precautions Page Page Page Page Page Page 1.1 About This Manual 1.2 Using This Manual WARNING DANGER! 1.3 Description, Features and Benefits Page 2.1 Vision 120 at a Glance 2. Controls and Functions 2.2 Vision 120 Rear Panel Page 2.3 VHD Controller Front Panel Page 2.4 VHD Controller Rear Panel 123 4 5 67 8 9 Page Controls and Functions 12 Vidikron Vision Model 120 Owners Operating Manual 2.5 Vision 120 Remote Control Figure 2-5. Vision 120 Remote Control LIGHT OFF ON SOURCE PICTURE MEMORY ASPECT RATIO Page Page 3.1 Remote Control 3.2 Quick Setup Table 3-1. Installation Overview 3.3 Installation Considerations Table 3-2. Projector Installation Options Table 3-3. Vision 120 Lens Options and Throw Ratios Ceiling Installation Floor Installation Figure 3-4. Horizontal Lens Shift (EXAMPLE ONLY) Table 3-4. Vision 120 Vertical and Horizontal Lens Shift Limits 3.4 Installing the Primary Projection Lens Page 3.5 Installing the Optional CineWide Lens Mount Page Page Page Page Page 3.6 Mounting the Vision 120 3.7 Connections to the Vision 120 and VHD Controller Page Installation Vidikron Vision Model 120 Owners Operating Manual 33 Digital (DTV) RGB or Component Video Connections: See Figure 3-12 and Figure 3-13. Figure 3-12. Digital (DTV) RGB or Component Video Connections (HD1, HD2) Figure 3-13. Digital (DTV) RGB or Component Video Connections (HD3) Page Page to Automation/ Control System or PC Page Page 3.8 Turning on the Power 3.9 Adjusting the Picture Orientation V120 Component RCA 16:9 480I 3.10 Primary Lens Adjustments 3.11 Installing and Adjusting the CineWide Anamorphic Lens Page Page Page Page Wrong Position Correct Position Page Page Operation 50 Vidikron Vision Model 120 Owners Operating Manual Figure 4-1. VHD Controller OSD Menu Structure for Vision 120 Input Source Calibration ISF Presets Input Position 7 Table 4-1. Aspect Ratio Settings Table 4-1. Aspect Ratio Settings (continued) Page Page Page Page 7 Page Page Page Page 5.1 Lamp Replacement WARNING 5.2 Filter Replacement 5.3 Troubleshooting Tips Table 5-1. Troubleshooting Chart Page 6.1 RS-232 Connection and Port Configuration 6.2 Serial Command Syntax Table 6-1. Serial Commands and Responses Table 6-1. Serial Commands and Responses (continued) Page 7.1 Vision 120 Specifications Table 7-1 lists the Vision 120 specifications. Table 7-1. Vision 120 Specifications Table 7-1. Vision 120 Specifications (continued) 7.2 VHD Controller Specifications Table 7-2 lists the VHD Controller specifications. Table 7-2. VHD Controller Specifications Specifications 74 Vidikron Vision Model 120 Owners Operating Manual 7.3 Vision 120 Dimensions Figure 7-1 shows the Vision 120 dimensions (all dimensions are in inches). Figure 7-1. Vision 120/CineWide with AutoScope Dimensions