Vidikron v120 manual Picture

Operation

Table 4-1. Aspect Ratio Settings (continued)

	Remote
Aspect Ratio	Control		Description
	Key
Cinema	CINEMA			Select Cinema to view 2.35 source
				material in its native aspect ratio.
				With a 16:9 screen and a
				non-CineWide projector (no
		2.35:1 Image on		anamorphic lens), the upper and
				lower portions of the screen are
		16:9 Screen
		(Cinema aspect ratio / no CineWide)		masked, but the geometry of the
				active image area is unchanged.
				With a 2.35:1 screen and a
		2.35:1 Image on		CineWide-equipped projector,
				the VHD Controller scales the
		2.35:1 Screen
		(Cinema aspect ratio / CineWide)		2.35:1 image so that the active
				image area fills the 16:9 chip
				surface, eliminating the black
				bars. The secondary, anamorphic
				lens then restores the proper
				geometry to the 2.35:1 image.
IntelliWide 2.35	IWIDE			A 16:9 image is scaled
	2.35			NON-linearly (more on the sides
		16:9 IImage on		than in the center) to fit a 2.35:1
		22..35:1 Screen		screen.

IntelliWide 2.35 is available only on the Vision 120/CineWide.

16:9 Image on

2.35:1 Screen with

Intelliwide 2.35

Use the controls in the Picture Menu to calibrate your Vision 120 for optimum picture quality.

The Vision 120 has been designed to incorporate setup and calibration standards established by the Imaging Science Foundation (ISF). The ISF has developed carefully crafted, industry-recognized standards for optimal video performance and has implemented a training program for technicians and installers to use these standards to obtain optimal picture quality from Vidikron video display devices. Accordingly, Vidikron recommends that setup and calibration be performed by an ISF certified installation technician.

All signal types require separate processing. Therefore, you need to calibrate each VHD Controller input separately.

When you change a picture quality setting, save the change to a preset

Note afterwards. Otherwise, the change will be lost when a different input is selected. (Picture quality settings are saved for each input separately.) For information about saving settings, refer to ISF Presets on page 58.

Picture

Picture

Brightness

Contrast

Color

Tint

Sharpness

Vidikron Vision Model 120 Owner’s Operating Manual 53