100

Operation

•Save Settings: For each input and supported resolution, the DView lets you save image quality settings as presets that you can recall at a later time. You can create up to three presets – designated “Custom,” “ISF Day” and “ISF Night” – per input and resolution.

You should save changes to any of the following settings to a preset; otherwise they will be lost when a new input source or resolution is selected:

•Brightness

•Contrast

•Color saturation

•Tint

•Sharpness

•Gamma

•Color temperature selection (5400, 6500, 8500 or Custom)

To save image settings to a preset, select Save Settings from the Picture Adjust menu and select “Custom,“ “ISF Day” or “ISF Night.”

White Balance: To remove any trace of color from the white areas of the displayed image, set the Color Temp. to Custom. Then, choose White Balance from the ISF Calibration menu and press ENTER.

•Gain: Use the Gain controls to correct color imbalances in the bright areas of the image. A good way to do this is to use a test pattern consisting mostly of solid white areas, such as an 80 IRE “window” pattern. If the white areas contain traces of red, green or blue, decrease the Gain for that color.

•Offset: Use the Offset controls in the White Balance sub-menu to correct color imbalances in the dark areas of the image. A good way to do this is to use a test pattern consisting mostly of dark gray areas, such as a 30 IRE “window” pattern. If the gray areas contain traces of red, green or blue, decrease the Offset for that color.

Any white balance adjustments you make here are automatically stored

Note as a “Custom” color temperature. The White Balance settings for the 5400K, 6500K and 8500K color temperatures are factory-set and cannot be changed. Always set the Color Temp. to Custom before making any white balance adjustments, so you can see how those adjustments affect the image.

Blue Enable: Blue Enable removes all red and green color information from the image, simulating a blue filter. You can use it instead of a blue filter when performing color and tint adjustments.

Baud Rate: Select Baud Rate from the ISF Calibration menu to set the data transfer rate of the DView’s RS-232 SERVICE port. (This setting must match the data rate of the device connected to the RS-232 input.)

Serial Link: Select Serial Link from the ISF Calibration menu to configure the RS-232 Service port (see Figure 3-10)for normal operation (On) or for software upgrades (Off).

Factory Reset: To reset all DView settings to their factory defaults, select Factory Reset from the ISF Calibration menu and press ENTER. This command is not undoable. Use it with caution!

White Balance

	R Gain	100
	R Gain	100
	G Gain	100
	B Gain	100
	R Offset	50
	G Offset	50
	B Offset	50

Vidikron VL-52 and VL-57 Owner’s Operating Manual

VL-57, VL-52 specifications

The Vidikron VL-52 and VL-57 are high-performance projection television models that encapsulate advanced technology and design, aimed at delivering an exceptional viewing experience. Manufactured during an era when home theater systems were evolving, these models became known for their cutting-edge features and superior picture quality, setting a benchmark in the projection television market.

The VL-52 features a 52-inch screen size, while the VL-57 sports a larger 57-inch display, both offering expansive viewing areas ideal for home cinema setups. One of the key characteristics of these models is their use of a high-resolution CRT (Cathode Ray Tube) technology, which provides vibrant colors and deep blacks, enhancing the overall image quality. The zoned convergence adjustment allows users to fine-tune the picture, ensuring that colors align perfectly across the entire screen.

In terms of features, both models support various video formats, including 480i, 480p, and 1080i, allowing for high-definition viewing on compatible content. The inclusion of multiple inputs, such as component, composite, and S-Video, ensures that users can connect a variety of devices, from DVD players to gaming consoles, easily. This versatility makes the VL-52 and VL-57 attractive options for consumers seeking a comprehensive entertainment solution.

The technologies integrated into these models also contribute to their performance. The onboard video processing capabilities enhance image clarity and reduce motion blur, making fast-paced action scenes more enjoyable. Furthermore, both models are equipped with an advanced color management system, which ensures that colors remain true to the source material, providing viewers with a lifelike experience that is reminiscent of the cinema.

Another noteworthy characteristic is the build quality. The Vidikron VL-52 and VL-57 feature a robust and elegant design, making them a fitting centerpiece in any home theater setup. The attractive cabinet work and premium materials used in their construction reflect the brand's commitment to quality and aesthetics.

Overall, the Vidikron VL-52 and VL-57 remain iconic models, blending technology, performance, and design. As home entertainment continues to evolve, these projectors stand as a testament to the innovation that defined their era, offering features and characteristics that can still impress enthusiasts today.

Vidikron VL-57, VL-52 manual 100

Models: VL-57 VL-52

Operation

VL-57, VL-52 specifications