Vienna Acoustics owner manual Setup procedure for the Principal Grand subwoofer

Setup procedure for the Principal Grand subwoofer

1.In order to prevent scratches and finger-prints we have supplied with each Principal Grand a pair of our special cloth gloves. We highly recommend using these throughout the entire setup process.

2.Connect the Principal Grand subwoofer using either a pair of speaker connections, a pair of Phono (RCA) cables for stereo or a single LFE cable subwoofer cable. In each case we recommend that you discuss the best connection scheme with your retailer and purchase the appropriate cable choice.

3.Connect the Principal Grand to the AC power outlet.

4.Turn on the Master Power Switch.

Note: If the power LED does not immediately illuminate, please check that the On/Auto switch is in the Auto position. If this is the case, it will be necessary for the subwoofer to receive and audio signal before the LED will illuminate. For the setup procedure you may want to place this switch in the On-Position and then return it to the Auto-Position for normal operation.

5.For the ideal final setup as well as the most efficient use of setup time, please follow these simple dial-in instructions.