To attach the speaker to the wall-mounting device:
ATTENTION:
As both WEBERN or BERG are symmetrical in driver orientation (having not top or bottom) selecting an orientation position for the speakers so that the tweeters face in or out, as well as up or down, can be done to suit the nature of each
installation. It is recommended that experimentation take place to determine which orientation of the tweeters results in optimal performance.
1.Please put on the enclosed gloves to avoid fingerprints.
2.Insert the lower conical tipped bolt inside the
ATTENTION:
The accessories box includes two plastic sockets, which you can put on the conical point of the bolts to avoid scratching the inlays. Once the preferred position is found, they can be removed.
3.After you have chosen a position, place the speaker in away that the lower bolt fits into the chosen conically milled point on the cabinet inlay.
