attach the speaker to the bracket by tightening completely the upper conical tipped bolt with the hexagonal tool (Allen wrench/ key). Please make sure that you use the same conically milled point on both, lower and upper, inlays.
ATTENTION:
For safety reasons it is recommended that all connection bolts be tightened every six months.
B. Free-standing application:
Connecting the speakers to the aluminium stands (please see drawing):
ATTENTION:
Usually, you want the tweeters to look in two different directions. In this case, you have to act as follows:
1.Please put on the enclosed gloves to avoid fingerprints.
2.Put your pair of speakers in front of you in a way that the tweeters are to the inside.
3.Pull out the inlay of each speaker. Since they are attached with magnets, they simply pull off.
