Quick Installation
1. Connect power cord
Connect the power cord to a properly grounded AC outlet.
2.Connect video cable
•Make sure both the monitor and computer are turned OFF.
•Connect the video cable to the computer.
Macintosh® users: Models older than G3 require a Macintosh adapter. Attach the adapter to the computer and plug the video cable into the adapter.
To order a ViewSonic® Macintosh adapter, contact ViewSonic.
See “Customer Support” on page 13.
3.Turn ON monitor and computer
Turn ON the monitor, then turn ON the computer. This sequence (monitor before computer) is very important.
Note: At this point Windows users may receive a message asking them to install the INF file.
4.Install Display Optimization files (INF and ICM files)
Insert the ViewSonic® Wizard CD- ROM into your computer’s
Note: If your computer does not have a
Wait for the
Note: If the
on viewsonic.exe.
Follow the
5.Windows users: Set the Timing Mode (resolution and refresh rate) Example: 1600 x 1200 @ 85Hz.
For instructions on changing the resolution and refresh rate, see the graphic card’s user guide.
Installation is complete. Enjoy your new ViewSonic® color monitor.
To be best prepared for any future customer service needs: print this user guide and write the serial number in “For Your Records” on page 3.(See back of monitor.)
To register your product go online to www.viewsonic.com.
The ViewSonic® Wizard
Ports for optional BNC video cables
Port for
LINE
INPUT
Power Cord
from monitor to AC outlet
| SOG | |
R G B H/H+V V | ON | |
OFF | ||
|
ViewSonic
RG B H/H+V V
Power Cord from computer to AC outlet
ViewSonic G225f/G225fB/G225fSB
5
