ViewSonic KP102 Quick Setup, To install the software drivers, Turn ON your computer and monitor

Quick Setup

The supplied CD-ROM contains important software drivers necessary for your keyboard (and mouse if included in package) to operate.

To install the software drivers:

1.With your computer turned off, connect the keyboard to the PS/2 port as shown below.

2.Turn ON your computer and monitor

3.Once your computer is on, insert the ViewSonic Wizard CD into your computer’s CD drive.

Wait for the CD-ROM to auto- start. If your computer does not have a CD-ROM drive, contact Customer Support.

If the CD-ROM does not auto- start: double-click on the CD- ROM icon in Windows Explorer, then double-click on setup.exe.

Follow the on-screen instructions: select Software Install or View the user guide.

4.Restart your computer. To be best prepared for any future customer service needs: print this user guide and write the serial number in “For Your Records” on page 2. The serial number is on the bottom of the keyboard.

You can register your product online at the website for your region. See the Customer Support table in this guide.

The ViewSonic Wizard CD-ROM also provides an opportunity for you to print the registration form which you may mail or fax to ViewSonic.

PS/2 connector

ViewSonic ViewMate™ Office Keyboard KP102/202 4