Bunn S/N DUAL068000 Review Recipes/Modify Recipes/Set Up No Name Coffee, Was The Last Recipe

PROGRAMMING THE BREWER (cont.)

REVIEW RECIPES/MODIFY RECIPES/SET UP NO NAME COFFEE:

This function has three parts. It allows the operator to view the brew settings for the various coffee names programmed into the brewer.

It also allows the operator to modify (change) any of the BREW VOLUMES, BYPASS PERCENTAGES, PULSE BREW TIMES, and DRIP-OUT TIMES for a particular coffee name programmed into the brewer.

Finally, this function is used to set up the two NO NAME coffee BREW VOLUMES, BYPASS PER- CENTAGES, PULSE BREW TIMES, and DRIP-OUT

TIMES.

Procedure for reviewing recipes:

1.Press and hold upper right hidden switch (®) until the display reads UNITS. Release the switch, then press and release switch until the display reads

REVIEW RECIPES.

2.Press YES to proceed. The display should now read NO-NAME LEFT, along with MODIFY, SHOW and NEXT.

3.Press and release SHOW. The screen will scroll through all the brew settings for that particular coffee name. When finished, the display will return to the coffee name just viewed.

4.To see settings again, press SHOW. To advance to the next coffee name, press NEXT.

5.To exit, press NEXT until the display reads THAT

WAS THE LAST RECIPE.

6.After 5 seconds, the display will return to the RE- VIEW RECIPES screen. Press and release NO to advance to the next function screen, or press and release either ON/OFF switch located on the front switch panel to exit the programming mode and return to the MAIN SCREEN.

REVIEW RECIPES?
NO	YES
EXIT TO
NEXT FUNCTION
SCREEN
NO-NAME LEFT
MODIFYSHOWNEXT
	<RECIPE NAME>
	MODIFYSHOWNEXT
SCROLLS THROUGH ALL
BREW SETTINGS FOR
	NO-NAME LEFT
	COFFEE NAME
	SCROLLS THROUGH ALL
	BREW SETTINGS FOR ANY
	OTHER COFFEE NAMES
	STORED IN BREWER'S MEMORY
	SCROLLS THROUGH ALL
	BREW SETTINGS FOR ALL
	COFFEE NAMES IN MEMORY
	WHEN IT REACHES LAST
	RECIPE IT WILL ADVANCE TO:
	THAT WAS THE
	LAST RECIPE
	P2360

Page 21 29877-3 062005