PROGRAMMING THE BREWER (cont.)
SET PULSE BREW - EASY PULSE SETUP
NOTE: The procedure to enter the PULSE BREW function must be performed prior to following the steps listed below.
1.The display should read BREW TIME: X.XX and a batch size indicator will be flashing.
2.Using
3.When finished, select another batch size to be set by pressing the switch next to the indicator light. Repeat step 2 for each batch size to be set.
4.When finished setting all batch sizes, press done. The display should read 3 BATCHES DONE ?.
5.If the three batch sizes are not correct, press and release NO to return to BREW TIME setup screen and repeat steps 2 thru 4. If they are correct, press YES. This will display the 1st, OFF, and LAST times for 5 seconds, then advance to the DRIP TIME setup. (See DRIP TIME SET UP)
|
| SET PULSE BREW? | ||
|
| NO |
| YES |
|
| EASY PULSE SETUP | ||
|
| NO |
| YES |
ENTER TIMES ? | BREW TIME XX.X | |||
NO | YES | DONE | (+) | |
| See SET PULSE BREW- | 3 BATCHES DONE? | ||
| ENTER TIMES | NO |
| YES |
|
|
| ||
|
| 1st | OFF | LAST |
|
| XX.X | XX.X | XX.X |
|
|
| 5 SEC. DELAY |
|
|
| DRIP TIME XX.X | ||
|
| DONE | (+) | |
3 BATCHES DONE?
NOYES
COFFEE NAME |
|
SETUP COMPLETE | P3507 |
|
Page 26 | |
|
