TROUBLESHOOTING (cont.)
Screen Displayed
BREW STOPPED!
SERVER REMOVED?
TO FINISH:
PRESS BREW
Possible Cause
1.Soft Heat Server was moved out of position after the brew cycle was started.
Troubleshooting Procedures
To resume brewing, correctly position the Soft Heat Server and press BREW again. The brew cycle resumes from the point it was inter- rupted.
OR
TO CANCEL
PRESS ON/OFF
BREW STOPPED! IS SWITCH OFF?
TO FINISH:
PRESS BREW
1.ON/OFF switch was pressed after the brew cycle was started.
Press ON/OFF to terminate the brew cycle.
To resume brewing, press BREW again. The brew cycle resumes form the point it was interrupted.
OR
Press ON/OFF to terminate the brew cycle.
TO CANCEL
PRESS ON/OFF
HEATING TIME | 1. | Tank Heater failure | Service Required | ||
TOO LONG | 2. | Triac Failure |
| ||
|
| Service Required | |||
|
| ||||
|
| 3. Control Board/Thermistor failure | Service Required | ||
CHECK HEATING | |||||
|
|
|
CIRCUIT
Page 43 | |
|