Bunn S/N DUAL068000 DRIP TIME now displayed on non funnel lock units as well, Setup Complete

PROGRAMMING THE BREWER (cont.)

DRIP TIME (now displayed on "non" funnel lock units as well)

This function allows the setting or modification of the funnel locks to stay engaged after the end of a brew cycle. This ensures that the funnel cannot be removed until after the liquid has emptied out of the funnel.

Procedure to modify drip times:

Range: OFF to 10 minutes for all three batch sizes.

NOTE: If the brewer is already in the DRIP TIMES screen, it is not necessary to follow steps 1 through 9 in this section, but proceed directly to step 10.

11.When finished, press another batch size and repeat step 10 until all three sizes are set.

12.When finished, press DONE. The display should read 3 BATCHES DONE?

13.If the three batch sizes are set correctly, press YES. The screen should show the name of the coffee flavor being programmed (modified) along with

SETUP COMPLETE.

14.After a 5 second delay, the display will advance to the next coffee name in the brewer's memory. If no other coffee names are present, the display will read THAT WAS THE LAST RECIPE, and return to the REVIEW RECIPES screen.

1.	Press and hold the upper right hidden switch until
	the display reads UNITS. Release the switch. Press
	and release switch until the display reads REVIEW
	RECIPES.
2.	Press YES to proceed. The display should now
	read NO-NAME LEFT, along with MODIFY, SHOW
	and NEXT.
3.	Press and release NEXT to advance to the desired
	coffee name to be modified.
4.	Press and release MODIFY. The display should
	read BREW OZ.
5.	Press and release DONE. The display should read
	3 BATCHES DONE?.
6.	Press and release YES. The display should now
	read % BYPASS.
7.	Press and release DONE. The display should read
	3 BATCHES DONE?.
8.	Press and release YES. The display should now
	read SET PULSE BREW.
9.	Press and release NO. The display should now read
	DRIP TIME, along with either the word OFF, or a

REVIEW RECIPES?

NOYES

EXIT TO

NEXT FUNCTION

SCREEN

NO-NAME LEFT

MODIFYSHOWNEXT

						ADVANCES TO ALL OTHER
						COFFEE NAMES PROGRAMMED
						IN THE BREWER'S MEMORY
SCREEN DISPLAYED			PRESS
BREW OZ: XX.XX			DONE
3 BATCHES DONE?				YES
% BYPASS XX.X			DONE			(COFFEE NAME)
3 BATCHES DONE?				YES
SET PULSE BREW?				NO	MODIFYSHOWNEXT
SET PREINFUSION?				NO
	DRIP TIME X:XX
(-)		DONE	(+)			WHEN THE LAST COFFEE NAME
						IN THE BREWER'S MEMORY IS
						DISPLAYED, PRESSING NEXT
						WILL EXIT AND THE DISPLAY
						WILL THEN READ:

time will be showing. A batch light should also be

blinking.

10. Using the (-)and (+), set the amount of time from

when the brew solenoid shuts off to when drip-out

occurs for that batch size.

NOTE: Set to OFF to prevent funnel locks from engag- ing (to disable this function), for a particular batch size. To set to OFF, press and release (-)until OFF is displayed.

3 BATCHES DONE?

NOYES

(COFFEE NAME)

SETUP COMPLETE

P2297

EXITS TO THE NEXT COFFEE NAME IN THE BREWER'S MEMORY. IF NO OTHER COFFEE NAMES ARE ENTERED IN THE BREWER'S MEMORY, THE DISPLAY WILL READ:

THAT WAS THE

LAST RECIPE

P2297

Page 29 29877-3 062005