PROGRAMMING THE BREWER (cont.)
SERVICE TOOLS
This function allows the testing of individual com- ponents and the ability to check switches for proper function. This function also tests the Soft Heat server's status on the brewer (in place or removed), and the funnel sensor coil's frequency (diagnostic tool for troubleshooting purposes only).
Testing individual components (outputs):
This will allow the operator to test the operation of individual components and outputs of the brewer.
The components that can be individually tested are as follows:
Left Brew Valve
Left Bypass Valve
Left Funnel Lock Left Server Right Brew Valve Right Bypass Valve Right Funnel Lock Right Server Refill Valve
Tank Heaters Heater Contactor
SERVICE TOOLS?
NOYES
EXIT TO
NEXT FUNCTION
SCREEN
TEST OUTPUTS?
NOYES
TEST SWITCHES? PRESS AND RELEASE
NO | YES |
| ® SYMBOL |
| |||
|
|
LEFT BREW VALVE
ON NEXT OFF
NOTHING PRESSED
|
| NEXT COMPONENT |
|
| TO BE TESTED |
TEST SERVERS? | SERVER REMOVED | |
NO | YES | IN PLACE |
TEST FREQUENCY? | PRESS AND RELEASE | |
NO | YES | ® SYMBOL |
| ||
|
| 125.0 KHZ. 4 |
| 4 | 125.0 KHZ. |
EXIT TO |
|
|
NEXT FUNCTION |
| PRESS AND RELEASE |
SCREEN |
| |
| ® SYMBOL | |
|
| |
|
| P2311 |
| Page 37 | |
|
| |
