Bunn S/N DUAL068000 manual PROGRAMMING THE BREWER cont, Recipe Programing Methods, Recipes

PROGRAMMING THE BREWER (cont.)

RECIPE PROGRAMING METHODS

There are three methods of programming the various brewing parameters of the DUAL SH DBC with Smart Funnel Brewer.

METHOD 1:

Using a Smart Funnel and a G9-2T DBC or MHG Grinder:

Certain coffee NAMES are stored in the G9-2T DBC or MHG's memory. When a particular name of coffee is ground into the Smart Funnel, that name and the batch size selected are transferred from the grinder to the programming chip located in the funnel's handle. The funnel is then inserted into the brewer's left side funnel rails. The sensor coil on the brewer reads the information contained in the handle. This then allows the operator to set the BREW VOLUMES, BYPASS

PERCENTAGES, PULSE BREW TIMES, PREINFUSION TIMES and DRIP-OUT TIMES for that particular coffee NAME. Each coffee NAME can be set individually to provide optimum brewing quality.

RECIPES

This diagram allows for the creating, modifying, or viewing of recipes in the brewer.

METHOD 2:

Using a RECIPE CARD to enter all of the brew set- tings at one time:

If using a coffee name not in the grinder's memory, the customer can obtain a RECIPE CARD from the factory with all the information needed to set up that particular coffee name. This includes the COFFEE NAME, BREW VOLUMES, BYPASS PERCENTAGES, PULSE BREW TIMES, PREINFUSION TIMES, and

DRIP-OUT TIMES.

METHOD 3:

Not using a Smart Funnel and/or a G9-2T DBC or MHG Grinder:

This allows the operator to enter ONE set of brewing parameters for each side, in the event a Smart Funnel and/or a G9-2T DBC or MHG is not used with the Dual SH Brewer. This is referred to as a NO NAME coffee flavor. If the brewer does not read the information in the funnel's handle, it automatically selects the NO NAME brewing parameters set up prior to brewing. This includes BREW VOLUMES, BYPASS PERCENT-

AGES, PULSE BREW TIMES, PREINFUSION TIMES and DRIP-OUT TIMES for the three batch sizes.

ARE YOU CREATING OR CHANGING A RECIPE FOR A

COFFEE NAME PREVIOUSLY USED IN THIS BREWER?

DON'T	YES	NO
KNOW
	HAVE YOU RECEIVED A RECIPE CARD
	CONTAINING THE NEW RECIPE?
	YES		NO
	FOLLOW INSTRUCTIONS	DOES THE GRINDER HAVE THE
	ON THE RECIPE CARD		NAME IN ITS MEMORY?
		NO	DON'T KNOW		YES
YOU WILL MODIFY AN				GO TO SET NEW RECIPE,
	EXISTING RECIPE	YOU WILL ENTER
					AND FOLLOW THE
		THE NO NAME LEFT
					INSTRUCTIONS
		AND NO NAME
		RIGHT BREW			REFER TO NAME LIST
	GO TO REVIEW RECIPES	SETTINGS
					IN GRINDER MANUAL
AND FOLLOW INSTRUCTIONS		OR

	CONTACT BUNN-O-MATIC
TO VIEW A LIST OF EXISTING RECIPES,
	FOR ASSISTANCE
GO TO REVIEW RECIPES
AND FOLLOW THE INSTRUCTIONS	P2369

Page 12

OR

29877-3 062005