To adjust the screen image:

1.To display the OSD main menu, press button of front bezel or the MENU key of the remote controller. User can use the four arrow keys to move the marker. Pressing MENU key when in the menu shall exit the OSD menu.

NOTE: All OSD menus and adjustment screens Time-out automatically after about 30 seconds.

2. The OSD is organized into “TABS” and “PAGES” pressing ← or → scrolls through TABS. Pressing ↑ or ↓ navigates through the Pages.

3.After a page is selected, press button [Enter]. A control screen like the one shown below appears.

The ← left Arrow decreases,,

→right arrow increases

The other lines of the screen tell you what you can do next:

4. To save the adjustments and exit the marker, press button [Enter].

The following tips may help you optimize your display:

Adjust your computer's graphic card so that it outputs a video signal 1280 x 768@ 60 Hz to the Display. (Look for instructions on “changing the refresh rate” in your graphic card's user guide.)

If necessary, make small adjustments using H POSITION and V POSITION until the screen image is completely visible. (The black border around the edge of the screen should barely touch the illuminated “active area” of the NexTVision® display.)

ViewSonic N1700w 11