Troubleshooting
No power
Make sure power button (or switch) is ON.
Make sure A/C power cord is securely connected to the DC power supply and the power supply is firmly connected to the Display.
Plug another electrical device (like a radio) into the power outlet to verify that the outlet is supplying proper voltage.
Power is ON but no screen image
Make sure the video cable supplied with the Display is tightly secured to the video output port on the back of the computer. If the other end of the video cable is not attached permanently to the Display, tightly secure it to the NexTVision display.
Adjust brightness and contrast.
If you are using an Macintosh older than G3, you need a Macintosh adapter.
Wrong or abnormal colors
If any colors (red, green, or blue) are missing, check the video cable to make sure it is securely connected. Loose or broken pins in the cable connector could cause an improper connection.
Connect the Display to another computer.
Control buttons do not work
Press only one button at a time.
VXP problems
The VXP adapter must be plugged in when the display is turned on. It is not
ViewSonic N1700w 29