Image Scale Page

←and → shall be used to navigate across the horizontal tabs (Scale Mode and Aspect Ratio).

↑ and ↓ keys shall be used to navigate to the selection (Full Scan, 1:1, etc.)

Pressing enter shall invoke the selection (1:1 is shown) Time out or MENU shall exit the OSD.

FunctionExplanation

SCALE MODE 1. These checkboxes determine how an incoming PC or video signal is scaled to be displayed on a panel.

a.Full Screen = Displays the incoming signal and scales the image to use ALL available pixels on the screen.

b.1:1 = Displays the image in it’s ‘native’ resolution using exactly a one to one correspondence in input vs. output pixels. A “Black Box” shall surround all non-used pixels.

c.Aspect Ratio = Scales the image as large as possible, but maintain the signal’s correct aspect ratio. Non-used area of the screen shall be ‘black-boxed’

DEFAULT Restores all controls to factory default.

ViewSonic N1700w 17