Quick Installation

1 Remove two rear panel covers

2 Connect power cord and AC/DC adapter

3 Connect video cable

Make sure both the LCD display and computer are turned OFF

Connect the video cable from the LCD display to the computer

Macintosh users: Models older than G3 require a Macintosh adapter. Attach the adapter to the computer and plug the video cable into the adapter. To order a ViewSonic® Macintosh adapter, contact ViewSonic Customer Support.

4 Turn ON LCD display and computer

Turn ON the LCD display, then turn ON the computer.

NOTE: Windows users may receive a message asking them to install the INF file. This is on the CD.

5 Insert the ViewSonic Wizard CD into the computer’s CD drive.

Follow the on-screen instructions If your computer does not have a CD-ROM drive, see “Customer Support."

(1)Wait for the CD-ROM to auto-start. NOTE: If the CD-ROM does not auto-start: double-click on the CD-ROM icon in the Windows Explorer, then double-click on viewsonic.exe.

(2)Follow the on-screen instructions.

6 Audio Installation (optional)

Speakers Connect the audio cable (line color) to the AUDIO OUT port of your computer’s sound card, then to the LCD display’s AUDIO IN (line color) port (see illustration below).

7 Windows users: Set the timing mode (resolution and refresh rate)

Example: 1280 x 768 @ 60 Hz.

For instructions on changing the resolution and refresh rate, see the graphic card’s user guide.

8.Installation is complete. Enjoy your new ViewSonic, LCD display.

You can register your product online at the website for your region. See the Customer Support table in this guide. (page 32)

Audio Out

Audio In

Video(D-sub) IN

DVI

 

VXP

 

 

 

 

 

Power IN

Computer

power cordRear panel covers

Power cord and

AC/DC adapter

AC outlet

ViewSonic N1700w 4