ViewSonic N2000 Installation , CAUTION

ViewSonic N2000 8
Installation
1. Insert Remote Control Batteries
1) Remove the battery cover.
2) Insert the batteries, corresponding to the (+) and (−) markings on the battery compartment.
3) Re-attach the battery cover.
CAUTION
• Only use the specified AAA batteries.
• Do not mix new and old batteries. This may result in cracking or leakage, which may pose a fire
risk or lead to personal injury.
• Insert batteries according to (+) and (−) markings. Inserting the batteries incorrectly may result
in cracking or leakage, which may pose a fire risk or lead to personal injury.
• Dispose of the battery in accordance with local laws and regulations.
• Keep the battery away from children and pets.
• When the remote control will not to be used for an extended period, remove the batteries.
2. Connect audio and video cables to PC
Connect one or all of the following into the back of the N2000 LCDTV
IMPORTANT: Make sure all devices are off before you begin.
PC RGB CONNECTION: Connect the supplied analog VGA cable from your PC VGA OUT
port to the N2000 LCDTV RGB IN port.
AUDIO CONNECTION: Connect the supplied stereo mini cable from the PC’s AUDIO OUT
port to the AUDIO IN port on the N2000 LCDTV.