Image (Computer / Video Mode)
Contrast
The contrast controls the degree of difference between the lightest and darkest parts of the picture. Adjusting the contrast changes the amount of black and white in the image.
Press to decrease the contrast.
Press to increase the contrast.
Brightness
Adjusts brightness of the image.
Press to darken the image.
Press to lighten the image.
Keystone
Adjusts image distortion caused by tilting the projector.
Aspect Ratio
Use this function to choose your desired image size.
1 :1: Keep the image with original
16:9: The input source will be scaled to fit the width of the screen.
4:3: The input source will be scaled to fit the projection screen.
Blank Screen
Blanks the screen temporarily, and selects the screen color when this function is active.
Gamma
Selects Gamma mode.
RGB: Computer text mode
Photographic: Computer photo mode
Video: Common video mode
Film: Dark video image mode
White Peaking
The white peaking control adjusts the white peaking level of the DMD chip. 0 stands for minimal segment, and 10 stands for maximum segment. If you prefer a stronger image, adjust towards the maximum setting. For a smooth and more natural image, adjust towards the minimum setting.
Color Temperature
Adjusts color temperature. At higher temperature, the screen looks colder; at lower temperature, the screen looks warmer. If you select “User”, “Red”, “Green” and “Blue” can be adjusted.
ViewSonic | PJ506D | 22 |
