13.For ventilation reasons, the fan continues to operate after the projector has been powered off. Please do not unplug the power cord until the fan stops.
14.The projector is equipped with ventilation holes (intake) and ventilation holes (exhaust). Do not block or place anything near these slots, or internal heat build- up may occur, causing picture degradation or damage to the projector.
15.When you replace the projector lamp, never touch the new bulb with your bare hands. The invisible residue left by the oil on your hands may shorten the bulb life. Use
16.The product should be situated away from heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat.
17.Do not overload wall outlets, extension cords, or integral convenience receptacles as this can result in a risk of fire or electric shock.
ViewSonic PJ506D
