Using the TV Features
Operation
Turning the TV On and Off
Press the POWER button on the remote control.
You can also use the Power button on the front of the panel.
Initial Setup
(Setup Wizard only appears when first turning the TV on and without channel scanning.)
1.Press the POWER button on the remote control. The Setup Wizard window will be display.
2.Press ◄ or ► to select OSD language, then press ENTER,◄ or ► to confirm the selection, and press ENTER once more to go to next step. To change the selection, press ▲ or ▼. To return to the previous page, press MENU.(See Figure1)
3.Select Time Zone of your location. To press ▼ to setup DST (Daylight Saving Time) and select On or Off with ◄ or ►, according to the time zone of your area. To press ▼ to setup Time Format, and select
4.Select TV Source from Air or Cable, then press ENTER to continue. (See Figure3)
5.The Initial Setup will be completed after Cannel scanning is finished. To interrupt the scanning, press MENU at any time. (See Figure4)
Figure 1 | Figure 2 |
ENGLISH
Figure 3 | Figure 4 |
Contact ViewSonic service team at: http://www.ViewSonic.com or call our service team: United States
ViewSonic | 25 | VT2730 |
