Viking 324 Features Cycles, Pots/Pans, Normal Wash, Light/China, Rinse/Hold, Hi Temp Wash, Model

Features: Cycles Features: Cycles

Product Controls

324 Model

Wash Cycles

POTS/PANS

Heavily soiled pots, pans and casserole dishes. Long heated prewash loosens up encrusted food. High temperature main wash and final rinse.

NORMAL WASH

Normally soiled dishes. Energy-usage label is based on this cycle.

LIGHT/CHINA

Lightly soiled items, china and crystal. Lower temperatures for cleaning delicate items.

RINSE/HOLD

All dishware. Short rinse with no heat.

Options

HI TEMP WASH

Increases the temperature, adding heat, time and water for improved cleaning performance. Available only with POTS/PANS and NORMAL WASH.

Note: Periods of soaking will occur to aid in removal of baked on soils

SANITIZED 155˚F RINSE

Raises water temperature to 155˚F in the final rinse. Adds heat and time to the cycle. This high temperature rinse sanitizes your dishes and glassware in accordance with NSF/ANSI STANDARD 184 for Residential Dishwashers. Certified for residential dishwashers and not intended for licensed food establishments. Available only with POTS/PANS and NORMAL WASH.

Cycles Options

DELAY START

Lets you delay running the dishwasher for up to 4 hours. To set “DELAY START”, select the desired wash cycle and option(s). Press the “DELAY START” button once and the number “2” will light, indicating a two hour delay. If you desire a longer delay, continue pressing the “DELAY START” button to a 4 hour delay. The corresponding number on the button will light. Once you have set the desired delay time, press the “START” button and close the door. “DELAY START” is not available with the Rinse/Hold cycle.

AUDIBLE SOUND SIGNAL

A single beep will occur when you select cycles, options and press the “START” key. If the “START” button is not pressed or if the door is not closed within 4 seconds of pressing the “START” button, 3 short beeps will occur. The end-of-cycle signal consists of 2 long beeps and activates 30 minutes after the last drain, when the condensate dry portion of the cycle is completed. For all other error messages and to deselect the audible sound signal, see the Troubleshooting/ Fault Codes section.

ILLUMINATION OF BUTTONS

Option, Cycle and Start buttons will only illuminate after they are selected. The "SANITIZED" indicator will illuminate when the cycle has been completed. If your dishwasher did not properly sanitize your dishes, the indicator light will not illuminate. This can happen if the cycle is interrupted or the water could not be heated to the required temperatures. The "SANITIZED" indicator light goes off after you have opened and closed the door or if you press and hold the START/RESUME button.

Product Controls

10 11