Table of Contents
IMPORTANT– Please Read and Follow
Warnings & Important Safety Instructions _______________________________________________3
Dimensions (30”W.) __________________________________________________________________5
Dimensions (36”W.) __________________________________________________________________5
Specifications _______________________________________________________________________6
Cutout Dimensions __________________________________________________________________7
Clearance Dimensions________________________________________________________________7
Electrical Requirements_______________________________________________________________9
General Information ________________________________________________________________10
Installation _________________________________________________________________________10
Final Preparation ___________________________________________________________________11
Performance Checklist ______________________________________________________________11
Service & Registration_______________________________________________________________11
•Before beginning, please read these instructions completely and carefully.
Your safety and the safety of others is very important.
We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages.
This is the safety alert symbol. This symbol alerts you to hazards that can kill or hurt you and others.
All safety messages will be preceded by the safety alert symbol and the word “DANGER,” “WARNING” or “CAUTION.” These words mean:
DANGER
Hazards or unsafe practices
which WILL result in severe personal
injury or death
WARNING
Hazards or unsafe practices
which COULD result in severe personal
injury or death
CAUTION
Hazards or unsafe practices which COULD result in minor personal injury or property damage.
All safety messages will identify the
hazard, tell you how to reduce the chance of injury, and tell you what can happen if the instructions are not followed.
•DO NOT remove permanently affixed labels, warnings, or plates from the product. This may void the warranty.
•Please observe all local and national codes and ordinances.
•Please ensure that this product is properly grounded.
•The installer must leave these instructions with the consumer who should retain for local inspector’s use and for future reference.
•Installation must conform with local codes or, in the absence of codes, the National Electrical Code, ANSI/NFPA
In Canada: Electrical installation must be in accordance with the current CSA C22.1 Canadian Electrical Codes Part 1 and/or local codes.
2 | 3 |
